Hydrocarbon / Oil Analysers

Hydrocarbon and oil analysers are instruments used to detect and measure the presence of hydrocarbons in oil and other fluids. These analysers use various techniques such as gas chromatography, mass spectrometry, and infrared spectroscopy to identify and quantify the hydrocarbons present.

triangle_down

4000 Series

  • 4020 Total Hydrocarbon Analyser

    ​Uses FID to measure total hydrocarbons in ppm in a sample gas stream

  • 4030 Total Hydrocarbon Analyser

    ​Basic 40​​20 with sample system at a higher temperature for heated applications

    Avoids condensation of the sample

  • 4040 Methane / Non-Methane

    ​Basic 4020, plus temperature-controlled sampling system with GC column to give accurate readings of both methane and non-methane hydrocarbons in a gas stream

  • ​4060 Benzene Analyser

    ​Same as 4040, but used to measure ppb levels of benzene instead of methane/non-methane​

  • ​4080 Total Hydrocarbon Analyser

    Basic 4020 with sample system including stripper to measure total hydrocarbons in an aqueous sample​

Download Brochure
oil-in-water

The Model 4080 is designed to detect hydrocarbons (C1-C9+) which may not absorb in the UV region)​

Other Models in This Range

6650p-oil-in-water-analyser

Model 6650P

Oil-In-Water Analyser

The Model 6650SP is comprised of a versatile transmitter and probe for monitoring oil-in-water in various refineries, power plants and offshore platforms. The system incorporates state-of-the-art electronics and a fibre optic based in-situ probe that detects oil-in-water.

Download Brochure
6700e-total-organic-analyser

Model 6700E

Total Organic Carbon Analyser

Online monitoring of total organic carbon is essential for regulatory and process control purposes among water treatment, wastewater and industrial users. Teledyne’s 6700E Series employs proven UV-Persulphate methodology to isolate only organic carbons, oxidise them into carbon dioxide and measure TOC in the gas phase using infrared absorption technology.

Download Brochure
6700u-organics-analyser

Model 6700U

Organics Analyser

Teledyne’s 6700U leverages ultraviolet absorption (UVA) detection to measure for certain dissolved organic substances in water treatment and wastewater applications. Absorption of UV light at the 254 nm band is an indication of the presence of disinfection byproducts (DBPs), tri-halo methanes​​ (TTHM) and halo-acetic acids (HAA). The 6700U provides an on-line measurement without reagents and utility gases required.

Download Brochure

For More Information Get In Touch

Name
This field is for validation purposes and should be left unchanged.